Spectrum Robotic Systems


Manufacturers of the Vectaspark, an advanced EDG or Electro Discharge Grinding machine, used for the non-contact material removal of electrically conductive materials such as PCD. The Vectaspark uses a simple touch screen interface, and erodes material at an extremely rapid rate with very good surface finish and edge quality.




Product Name: 2000 Series Laser Knife
Product Category: Heavy Equipment - Equipment

The 2000 series is one of our best selling cutting systems. The versatility of a laser is unmatched. For applications from paper cutting through sailmaking materials to cutting steel. Powers of laser range from 10 to 2500 watts. With laser power control so sophisticated that one sheet of paper can be cut, with another underneath untouched. Attributes of laser cutting are: Higher speed processing than other tools, sealing of all cut edges, narrow kerf width and versatility.

Product Name: 2001 Series Ultrasonic Knife
Product Category: Heavy Equipment - Equipment

The 2001 series is extremely useful when processing materials where traditional methods fail. A good example is pre-preg kevlar. A cold, dry method of cutting is required to cut this incredibly strong, sticky material. Ultrasonic cutting will process this material without burning, delaminating or otherwise degrading the material. All controls are automated, position, height and steering of the blade.

Product Name: 2002 Series Water Knife
Product Category: Heavy Equipment - Equipment

The 2002 series is a non-contact cutting method. Pure water is a very clean method which can be used to cut products in the food industry and materials which require a very clean environment. At the other end of the scale using an abrasive with the water allows metals up to 20mm Stainless Steel to be cut. The finish on the cut edge is exceptionally good and requires very little post cut finishing. Due to its abrasive action water can be used to cut glass, ceramics, marble and engraving of marble.

Product Name: 2003 Series Trailing Blade
Product Category: Heavy Equipment - Equipment

The 2003 series is a lower cost option than the above. Its simplicity is its key to success. Using a commercially available craft knife blade this system allows thin materials to be cut under computer control to a high degree of accuracy.

Product Name: 2004 Series Rotary Knife
Product Category: Heavy Equipment - Equipment

The 2004 series is the big brother of the 2003. Based on the same simple principle, it allows a "Pizza" wheel type cutter to perform the cutting. The initial penetration of the material is pneumatically operated, so heavier materials can be cut. Again, commercially available blades can be used so reducing the operating costs.

Product Name: Vectaspark EDM
Product Category: Engineering Office Supplies - Equipment

The Vectaspark 300 is our current model of EDM (spark erosion) machine.  The machine is the product of several years of hard work and technical implementation.  The end result is an excellent all-round system, capable of a variety of powerful spark erosion functions, with a fast, efficient and accurate control system.

Unit A12 Spithead Business Centre,
Newport Road
Sandown,, Isle of Wight PO36 9PH
United Kingdom
Phone: +440-1983-401188
Fax: +440-1983-408450
Contact us
Url: http://www.spectrum-robotics.com/


Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
12 Mid-January Economic Nuggets
VectorworksVectorworks Blog
by Vectorworks
You’re Probably Doing BIM Without Knowing It!
Jobs
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Mid-Level Landscape Architect/Designer for Studio-MLA at Los Angeles, California
Structures Retrofit Engineers for Boeing at Seal Beach, California
GIS Specialist for City of Ithaca at ithaca, New York
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
GIS Specialist- GIS & Data Services for County of Macomb - GIS & Data Services at Mount Clemens, Michigan
Upcoming Events
Structural Engineering Summit at Hilton Midtown New York NY - Feb 14 - 17, 2022
Utopian and Sacred Architecture Studies (USAS) - 2nd Edition at University Way, Dockland Campus London, E16 2RD, UK London --Choose One-- United Kingdom - Jun 14 - 15, 2022
Digital Built Week Americas at Anaheim CA - Jun 14, 2022 - Dec 31, 1969
HxGN LIVE Global 2022 - Future of Manufacturing at Las Vegas NV - Jun 20 - 23, 2022



© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise