Matches: 65
CAE : Structural Engineering

Product Name: ADAPT-ABI Version 4.xx
Company: ADAPT Corporation

ADAPT-ABI Version 4.xx is a special-purpose program developed for the design and analysis of prestressed concrete bridges built either segmentally or conventionally. It provides information for geometry and stress control during construction, as well as design values for service load.

Product Name: ADAPT-Builder
Company: ADAPT Corporation

ADAPT-Builder is a comprehensive and integrated solution for the analysis and design of post-tensioned and conventional concrete floor systems and beams. ADAPT-Builder is an umbrella program that allows you a variety of design and analysis options by activating one or more of its computational modules, including analysis by the Finite Element Method (FEM).

Product Name: ADAPT-Floor Pro
Company: ADAPT Corporation

Three-dimensional (3D) Finite Element Software for Analysis and Design of Concrete and Post-Tensioned Floor and Foundation Systems. Built on ADAPT's unique TrueStructure™ modeling and analysis technology, this software provides a powerful, yet easy to use tool for the analysis of all types of slab systems. Unlike other 2D diaphragm-based slab design programs, ADAPT-Floor Pro's true 3D FEM analysis provides the most accurate results even for the most complex transfer and waffle slabs.

Product Name: ADAPT-PT
Company: ADAPT Corporation

ADAPT-PT is the industry standard stand-alone program for the design of beam frames, slabs and floor systems post-tensioned with either bonded, or unbonded tendons. For two-way floor systems the user can base the analysis on either the Equivalent Frame Method, or the Simple Frame Method. For the post-tensioning design, the user can select between the Effective Force method and the Variable Force (Tendon Selection) method.

Product Name: ADAPT-RC
Company: ADAPT Corporation

ADAPT-RC is for the analysis and/or design of reinforced concrete beams, slabs and floor systems. It is based on a single story frame, featuring the Equivalent Frame modeling of the ACI code as an option. In its design mode, the program determines the deflection and reinforcement for a user defined geometry, material and loading. In its analysis mode, for a given floor geometry, loading and reinforcement, the software determines the capacity of the floor and compares it with the code stipulated demand.

Company: Amsysco, Inc.

Structures exposed to corrosive environments, such as parking garages, demand special protection. The AMSYSCO Encapsulated PT System is designed and produced to provide the highest possible level of corrosion protection. Our advanced design and manufacturing process provides watertight encapsulation of the steel strand, anchorage and all connections.

Product Name: AISC Shapes
Company: Archon Engineering Software

AISC Shapes is a database program that provides all the section and dimension properties for steel shapes, based on the 7th, 8th and 9th edition of the AISC steel manual.

Product Name: ArchWind 98
Company: Archon Engineering Software

ArchWind 98 makes the complex ASCE 7-98 wind load analysis simple. This program provides much more data output than our earlier wind load analysis program. It also provides the ability to obtain wind loads for most of the structure types described in ASCE 7-98.

Product Name: Beams
Company: Archon Engineering Software

This program will analyze any single or multi-span beam. The program includes a complete AISC steel shape data base and a section property calculator. The program will provide deflection, shear and moment diagrams. After running the load analysis the program will then perform a code check based on the AISC ASD 9th edition design code.

Product Name: Footings
Company: Archon Engineering Software

Footings will help you design single or adjacent footings, wall footings, spread footings and a lot more. You can adjust the way the program reviews the data to fit whatever code requirements you are working with.

Product Name: Retwall
Company: Archon Engineering Software

Need a quick stability analysis on a retaining wall? Retwall will give you soil bearing loads, analyze the wall stability, calculate all wall moments, design your rebar and give you design sketches. The program will handle flowing water and multi-layers of backfill. You can adjust all allowable values to meet whatever code requirements you are tied to.

Product Name: WinFrame
Company: Archon Engineering Software

Need joint reactions on a three member rigid frame? This program will give them to you. The latest version allows multiple load input.

Product Name: WinThread
Company: Archon Engineering Software

This neat little program provides a large database for all types of bolts and screws. It also will tell you the required torque.

Product Name: RAM Elements
Company: Bentley Systems

RAM Elements (formerly RAM Advanse) provides quick, reliable tools for specific structural tasks. RAM Elements is the only structural engineering software system that offers finite element analysis plus stand-alone or integrated design tools all in one low-cost, easy-to-use package.

Product Name: AutoPIPE
Company: Ceanet Pty Ltd.

AutoPIPE is a Computer Aided Engineering (CAE) program for stress analysis of piping systems. Developed to meet the needs of companies involved in industrial piping system design, AutoPIPE is a leading PC stress analysis package utilised worldwide

Product Name: ETABS
Company: Ceanet Pty Ltd.

ETABS is a program for linear, nonlinear, static and dynamic analysis, and the design of building systems. From an analytical standpoint, multistorey buildings constitute a very special class of structures and therefore deserve special treatment. The concept of special programs for building type structures was introduced over 30 years ago and resulted in the development of the TABS series of computer programs.

Product Name: Mathcad 14
Company: Ceanet Pty Ltd.

Mathcad lets individuals work with up-dateable, interactive designs, allowing them to capture the critical methods and values behind each of their engineering projects.

Product Name: PlantFLOW
Company: Ceanet Pty Ltd.

PlantFLOW is a software program used to design and analyse gas or liquid piping networks, including systems with loops and branches. Using an intuitive mouse driven interface, PlantFLOW's architecture and unique modelling features reduce the time required for piping flow analysis from days to hours on typical systems. Engineers can accurately simulate multiple design scenarios in minutes while sharing data with plant design CAD and piping stress analysis.

Product Name: RAPT
Company: Ceanet Pty Ltd.

RAPT is a design and analysis tool for reinforced and post tensioned concrete columns, slabs and beams. The RAPT analysis and design package for reinforced and post tensioned concrete structural systems has been written and developed by practising structural engineers as an everyday design tool. It is comprehensive in its treatment of the analysis and design of structural concrete

Product Name: SAFE
Company: Ceanet Pty Ltd.

SAFE provides state of the art analysis and design for concrete slabs and basemat/foundation structures. Based on the finite element method, this program offers accuracy and flexibility that cannot be matched by traditional hand calculations or from equivalent computer programs. Traditional methods for the analysis of simple slab systems are tedious and time consuming and are often inapplicable for complex geometries or loadings.

Product Name: CSiCOL
Company: Computers and Structures, Inc.

CSiCOL is a comprehensive software package used for the analysis and design of columns. The design of columns of any concrete, reinforced concrete, or composite cross-section can be carried out by the program. CSiCOL provides a 'Quick Design Wizard' tool that guides the users step-by-step, through the whole process of column design. This makes the design process simple, organized and efficient. The design can be carried out in accordance with ACI-318-02, ACI-318-99, BS8110 or CSA A-23.3-94 codes.

Product Name: ETABS Version 9
Company: Computers and Structures, Inc.

ETABS offers sophisticated 3-D analysis and design for multistory building structures, such as office buildings, apartments and hospitals. The input, output and numerical solution techniques of ETABS are specifically designed to take advantage of the unique physical and numerical characteristics associated with building type structures. A complete suite of Windows graphical tools and utilities are included with the base package.

Product Name: SAFE
Company: Computers and Structures, Inc.

SAFE is a special purpose program that automates the analysis and design of simple to complex concrete flat plates and foundation systems using powerful object based modeling. The program can analyze and design slabs or mats of arbitrary shapes and varying thickness, drop panels, openings, edge beams and discontinuities. Foundations can be combinations of Mats, Strip Footings or Isolated Spread Footings.

Product Name: SAP2000
Company: Computers and Structures, Inc.

SAP2000 represents the state-of-the-art in three dimensional finite element technology for structural engineering. This SAP is completely integrated within Windows 95/NT, and offers an easy-to-use graphical interface along with the latest developments in analytical techniques.

Product Name: SIMULIA
Company: Dassault Systèmes

Powered by the 3DEXPERIENCE® Platform, SIMULIA delivers realistic simulation applications that enable users to explore real-world behavior of product, nature and life. SIMULIA applications accelerate the process of evaluating the performance, reliability and safety of materials and products before committing to physical prototypes.  SIMULIA delivers a scalable portfolio of Realistic Simulation solutions including
  • multiphysics solutions for insight into challenging engineering problems (structures, fluids, acoustics, and structural applications)
  • lifecycle management solutions for managing simulation data, processes, and intellectual property
  • as well as still the Abaqus product suite for Unified Finite Element Analysis
By building on established technology, respected quality, and superior customer service, SIMULIA makes realistic simulation an integral business practice that improves product performance, reduces physical prototypes, and drives innovation. 

Product Name: Multiframe 2D/3D
Company: Daystar Software, Inc.

Fast and accurate structural analysis is the foundation of all computer aided structural design. Multiframe helps you get the results you require by providing powerful, yet easy to use analysis capabilities. Multiframe's 3D analysis tools give you an exceptionally powerful and flexible means of creating, analyzing and examining results for your structures.

Product Name: Section Maker
Company: Daystar Software, Inc.

A custom structural shape is sometimes the best solution to your structural design problem. But designing and calculating properties of custom shapes is a time consuming, error prone and frustrating exercise. Section Maker helps you to design a shape simply and quickly and then integrate your shape directly into the Multiframe library of sections.

Product Name: APILE Plus v5.0
Company: Ensoft, Inc.

The APILE software is used to compute the axial capacity, as a function of depth, of a driven pile in clay, sand, or mixed-soil profiles. The main computational methods used by APILE are those established by the American Petroleum Institute (API) in their manual on recommended practice, API-RP2A. The procedures from API have been adopted by a number of organizations.

Product Name: ATENA for Windows
Company: Ensoft, Inc.

ATENA is a computer program system for nonlinear finite element analysis of concrete and reinforced concrete structures. The ATENA program system consists of a set of individual programs and program modules for both 2D and 3D analysis.

Product Name: EnBeamC v6.0 for Windows
Company: Ensoft, Inc.

EnBeamC is a state-of-the-art program for the design and analysis of precast, prestressed concrete bridges girders made continuous by adding a composite slab with a diaphragm over the bridge piers. EnBeamC conforms to the '97 AASHTO Standard Specifications for Bridges.

Product Name: PRConn v3.0 for Windows
Company: Ensoft, Inc.

PRConn is a unique program for the analysis and design of partially restrained moment connections for steel frame structures. PRConn allows the user visually to describe the connection details of 36 different types of partially restrained moment connections.

Product Name: PYWALL v3.0 for Windows
Company: Ensoft, Inc.

The theoretical concepts used in the PYWALL software extends beyond the conventional method of analysis and design of flexible retaining walls based on limit-equilibrium theory. As a difference to conventional pratice, the PYWALL method does not ignore the effects of soil-structure interaction.

Product Name: S-Concrete for Windows
Company: Ensoft, Inc.

Reinforced Concrete Section Design and Detailing.The S-Concrete is developed by SOFTEK Services Ltd. S-Concrete includes Beam and Column Sections .

Product Name: TZPILE v2.0 for Windows
Company: Ensoft, Inc.

TZPILE v2.0 implements the well-known method of soilstructure interaction, commonly called the t-z method, where t-z curves are used for side resistance and q-w curves are used for load transfer in end bearing. The t-z and q-w curves can be internally-generated for both driven piles and drilled shafts with the input of information on the supporting soil and on the geometry of the pile.

Product Name: VenWal/CavWal 1.0 for Windows
Company: Ensoft, Inc.

The VenWal/CavWal program employs a rectangular plane frame for the rational structural engineering analysis for both masonry cavity walls and masonry veneer over steel stud backing. In walls of anchored veneer over steel studs the program considers the stiffness of masonry veneer, anchors, and studs.

Product Name: CE.CA.P.
Company: geo&soft international

Foundation analysis and design - bearing capacity of shallow foundations with different shapes - comparison of the most used calculation methods - homogeneous and stratified soils - bearing capacity of deep foundations: micropiles, small and large diameter piles - immediate and long term settlement in homogeneous or stratified terrain for single and for multiple shallow foundations - differential settlement - verification under seismic conditions and in the presence of water

Product Name: CLASROCK
Company: geo&soft international

Classification of rock masses with the Bieniawski (RMR index) and Barton (Q index) methods - the results of the calculation are presented as a list that can be viewed and directly printed by the program or imported into any word processor.

Product Name: DIADIM
Company: geo&soft international

Design and verification of sheet-piles and bulkheads - several levels of anchoring can be defined under different load conditions - iterative calculation for correct evaluation of successive excavation phases - the structure is calculated as a flexible beam on elasto-plastic supports with different constraints at the extremities - structural analysis of different sections (continuous diaphragms, beam bulkheads, armoured piles, sheet-piles) is performed through the determination of the moment and vertical stress, determined in the section under the highest stress, with a method based on the limit-state concept used in conjunction with the partial safety factor method (Eurocode 2).

Product Name: I.L.A.
Company: geo&soft international

Verification of the stability of slopes in granular soils - calculations under normal and seismic conditions - analysis of sliding surfaces with arbitrary shape or families of plane or circular sliding surfaces - analysis in the presence of water, in terms of total or effective stresses - possibility of dealing with heterogeneous stratified terrains - verification of the interaction between the slope and the restraint systems.

Product Name: INSITU
Company: geo&soft international

Interpretation of static and dynamic geotechnical in situ tests according to the most commonly adopted methods - STP tests: relative density, friction angle, effective and total vertical stress, constrained modulus, Young's modulus, cone resistance, shear modulus, cyclic modulus of deformation, upper limit allowed for the subsidence/load ratio. - CPT tests: friction angle, drained compressibility and relative density, undrained shear strenght, compressibility, sensitivity and overconsolidation - DP tests: all the information for the SPT tests is supplied - the program can be adapted to any measuring apparatus through correlation coefficients

Product Name: ISOMAP
Company: geo&soft international

Construction of map surfaces for geological sciences - contour lines - perspective views - the calculation methods are: inverse distance weighting, kriging, extrapolation of the surface with the recognition of the regional polynomial trend trough the elimination of closures of the contour lines - vectors and flow lines - digital filtering for geophysical techniques

Product Name: LIQUITER
Company: geo&soft international

Determination of the safety factor for the liquefaction of saturated coehsionless soils subjected to seismic tremors - the evaluation of soil resistance to cyclic shear forces is determined through the correlation between the resistance to liquefaction and the number of blows of the STP test - it is also possible to consider the presence of overloads and the water table effect - the resistance to liquefaction factor is calculated as the ratio between of the shear force that induces liquefaction and the maximum shear force induced by the seismic waves.

Product Name: ROCK3D
Company: geo&soft international

Analysis of rock slope faces with the Key Block Theory - recognition of the main discontinuity sets through hierarchical and non-hierarchical clustering - analysis of real discontinuities, based on their length and position on the slope face - identification of complex removable blocks based on the selected kinematic mode - determination of the volume of the rock blocks and of the safety factor of each identified block - design of the rock bolting that is necessary to reach a required safety factor.

Product Name: ROTOMAP
Company: geo&soft international

Three-dimensional analysis of rockfalls - determination of the path of falling boulders - frequency distiribution contour lines of the stop points of the rock blocks - energy distribution in relation to the mean and maximum kinetic energy - planimetric graphical restitution and in-section restitution of resulting data - optimisation of protective systems.

Product Name: VERCAM
Company: geo&soft international

Verification and design of retaining walls - gravity, semigravity and cantilever retaining walls - evaluation of the safety factor under normal and seismic conditions - validation of the concrete design and dimensioning of the reinforcement through the calculation of the bending moment of the foundation and of the footing pressure.

Product Name: CivilFEM
Company: Ingeciber S.A.

The most advanced and complete program in civil engineering calculations. CivilFEM is the most suitable analysis tool for any civil project, it uses the ANSYS calculation engine and the specified abilities developed to be use in the environmental monitoring.

Product Name: SmartSketch®
Company: Intergraph Corporation

SmartSketch is an innovative product for the technical office, combining world class business diagramming with award winning drawing technology. It is a versatile, cost-effective precision engineering and drafting product that gives EPCs and owner/operators a competitive edge throughout the life cycle by speeding productivity, cutting costs, and offering a sophisticated degree of automation for detail work

Product Name: Roofing
Company: Libart Enclosures Ltd. (US)

Indulge yourself as you bask in the glow, sheltered and protected from the elements when poor weather limits your enjoyment of your seasonal patio, porch or deck with Libart’s SolaGlide™ motorized roof system without compromising the look and feel of an outdoor retreat.

Product Name: RAM Concept
Company: RAM International

RAM Concept saves you precious time and money. Its finite element- based analysis provides major advantages over conventional strip methods, allowing you to handle complex floor design more accurately and with more confidence in the results.

Product Name: RAM Connection
Company: RAM International

RAM Connection is the first fully integrated steel connection design and optimization tool in the industry. Designing, checking and optimizing steel shear, moment, gusset, splice and bracket connections, according to AISC ASD or LRFD, has never been this automated. Assign connections directly to the finite element model and have RAM Connection automatically consider member geometric and material properties, and the analytical results, to choose the best connection for you.

Product Name: RAM Frame
Company: RAM International

RAM Frame is a state-of-the-art 3D static and dynamic analysis and design program for structural engineers. It is used for lateral frame analysis and design of building systems under lateral, dynamic, and gravity loads.

Product Name: RAM Structural System
Company: RAM International

The RAM Structural System was developed with one primary goal in mind… to help structural engineers increase their productivity so that they can produce better designs, faster. By providing powerful tools that are automated, integrated, and a complete alternative to traditional design methods, the RAM Structural System has accomplished this goal.

Product Name: STAAD.beava
Company: Research Engineers, a Bentley Solutions Center

STAAD.beava, the Bridge Engineering Automated Vehicle Application, is an integrated solution inside the STAAD.Pro environment. STAAD.beava uses 3D influence surfaces, which are generated by STAAD.Pro as part of the loading process. STAAD.beava will automatically generate influence surfaces for effects such as bending moments on members, support reactions, element stresses and nodal deflections.

Product Name: STAAD.offshore
Company: Research Engineers, a Bentley Solutions Center

STAAD.Offshore is a powerful suite of pre- and post processor modules for the STAAD.Pro structural analysis and design program. Comprised of two primary modules, waveload and transport, you additionally have the option of carrying out design code checks to the American Petroleum Institute (API) recommended practice for planning, designing, and constructing fixed offshore platforms with the STAAD.Pro API code check module.

Product Name: STAAD.Pro
Company: Research Engineers, a Bentley Solutions Center

STAAD.Pro is a comprehensive and integrated finite element analysis and design solution, including a state-of-the-art user interface, visualization tools, and international design codes. Capable of analyzing any structure exposed to static loading, a dynamic response, soil-structure interaction, wind, earthquake, and moving loads.

Product Name: M Series
Company: SCIA

SCIA has formed a strategic partnership with Geodelft to market specialised soil mechanics software. The product is a design software for sheet walls, earth wall, pile foundations, etc.

Product Name: Scia Engineer
Company: SCIA

A CAD model is built at the same time as the analytical project. This allows the immediate creation of useful plans for a preparatory project. All structures, as well as their parametric models, are workable. Our software has been adapted to many national and European standards. Finally they communicate in a transparent and bi-directional way with drafting packages like Allplan (Nemetschek) or ProSteel (Kiwi Software). And of course, they are adapted for importing files in DXF, DWG, &, format.

Product Name: GALENA
Company: Scientific Software Group

GALENA is a powerful and easy to use slope software system for Stability Analysis, Back Analysis, and Probability Analysis, with using the Bishop, Spencer-Wright and Sarma methods. GALENA solves problems for mining excavations, embankments, cuttings, dams, and foundations. GALENA provides you with a number of unique features to take much of the guesswork out of the natural variability of geological materials while making stability analysis easier than ever.

Product Name: QuickLog
Company: Scientific Software Group

QuickLog greatly speeds and simplifies the process of creating boring logs (borehole logs)/well lithology. Completely menu driven, QuickLog is intended to be used by geologists or data entry staff members to create boring logs diagrams without the need for a CAD system. The format of a boring log (borehole log) is designed by choosing headings and columns to be shown - no programming or complicated formatting commands are used.

Product Name: RETC
Company: Scientific Software Group

RETC, Retention Curve Program for Unsaturated Soils, is a computer program for describing the hydraulic properties of unsaturated soils. RETC may be used to fit several analytical models to observed water retention and/or unsaturated hydraulic conductivity data. RETC incorporates menu-driven data entry.

Product Name: SoilVision
Company: Scientific Software Group

SoilVision is the most complete package available for the estimation and/or representation of your unsaturated soil properties. Version 2.0 implements seven pedo-transfer functions for the estimation of the soil-water characteristic curve, eight methods for estimating saturated hydraulic conductivity, and five methods of estimating the unsaturated hydraulic conductivity.

Product Name: B-LINE™
Company: Softek Services Ltd.

Reinforced Concrete Continuous Beam Design and Detailing Software

Product Name: S-CONCRETE™
Company: Softek Services Ltd.

Reinforced Concrete Section Design and Detailing Software

Product Name: S-Frame
Company: Softek Services Ltd.

Design domes, trusses, space frames, beams, shoring, floor framing, building elements, towers, bracing, struts, 2D & 3D Structures, temporary and permanent structures. The list is limited only by your imagination.

Product Name: S-STEEL
Company: Softek Services Ltd.

S-STEEL Structural steel design software that is fully integrated with S-FRAME® / P-FRAME® providing interactive, automated design and analysis with code checking for strength & serviceability (deflection). S-STEEL™ is an add-on product to P-FRAME® & S-FRAME®
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
For First Time in 2 Years, Canada’s Quarterly GDP Growth Beats U.S.
Andrew WattsAECCafe Guest Blog
by Andrew Watts
Digital Pattern Books Disrupt Construction Industry
BIM Manager for Microdesk at San Francisco, California
BIM Consultant-Architecture for Microdesk at Boston, Massachusetts
Geographical Information Systems (GIS) Technician for Seacoast Utility Authority at Palm Beach Gardens, Florida
Mid-Level Mechanical Engineer in Process Piping for Gordon Prill, Inc at Santee, California
(GIS) Analyst III - Aviation Division for Texas Department of Transportation at Austin, Texas
Geographic Information Systems Technician for County of San Diego at San Diego, California
Upcoming Events
LEAF INTERNATIONAL 2019 at Berlin Marriott Hotel Berlin Germany - Oct 23 - 24, 2019
Design Within Beach! 2019 Monterey Design Conference at Asilomar Conference Grounds, 800 Asilomar Avenue Pacific Grove CA - Oct 25 - 27, 2019
Resilient and Responsible Architecture and Urbanism (RRAU) at Kuala Lumpur, Malaysia Kuala Lumpur Malaysia - Nov 5 - 7, 2019
ABX | ArchitectureBoston Expo - 2019 at Boston Convention and Exhibition Center Boston MA - Nov 6 - 7, 2019
Kenesto: 30 day trial
Bentley: Livestream from Singapore - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise