Products


Matches: 25
CAE : Mech/HVAC/Piping Design

Product Name: Flanges PPC
Company: Archon Engineering Software

FlangePPC displays the dimensional properties of ANSI B16.5 standard flanges. Flanges are indexed by the nominal pipe size, pressure class, and flange type.

Product Name: Pipe PPC
Company: Archon Engineering Software

PipePPC contains design information relative to standard pipe sizes. Pipes indexed by nominal pipe size and schedule (or weight). Pipe schedules are correlated to weight class where such a correlation exists.

Product Name: Autodesk Inventor
Company: Autodesk, Inc.

Make your move to 3D with Autodesk® Inventor™ software, the best choice for AutoCAD users. As the creators of AutoCAD software, Autodesk understands your design process and created the Autodesk Inventor family of products to make the move to 3D as easy as possible. Available in different product configurations to provide specific levels of functionality, Autodesk Inventor helps designers innovate and bring better products to market faster.

Product Name: AVEVA Pipe Stress Interface
Company: Aveva Group Plc

Analysing piping designs to check stresses and to design the supports is a specialist job. Developed in response to feedback from customers, AVEVA's new Pipe Stress Interface provides an interactive and intuitive method of specifying a stress network and delivers major savings by automating the two-way flow of information between PDMS designers and stress analysts.

Product Name: Bentley AutoPIPE V8i
Company: Bentley Systems

AutoPIPE is the choice of leading EPCs worldwide. The most comprehensive piping analysis software for 20 years in small to high-end piping projects worldwide for the power, oil and gas, petrochemical, offshore, and nuclear markets. Faster engineered piping systems backed by nuclear Quality Assurance to ISO 9001.

Product Name: CFD2000
Company: Ceanet Pty Ltd.

CFD2000 is an advanced, general-purpose computational fluid dynamics (CFD) software system for simulating a wide range of fluid flow and heat and mass transfer problems including:
  • Subsonic, transsonic, and supersonic
  • Chemical reaction
  • Chemical vapour deposition
  • Multi-phase flow

Product Name: HUMUSOFT
Company: Ceanet Pty Ltd.

HUMUSOFT was founded in November 1991 as a private limited company by five partners - year 1988 graduates in Control engineering at Czech Technical University in Prague.

Product Name: CAESAR II
Company: COADE, Inc. (acquired by the Intergraph Corporation)

CAESAR II is a comprehensive program for pipe stress analysis. CAESAR II has become the standard for pipe stress analysis, preferred by major corporations and engineering firms worldwide. It is the program by which all others are measured

Product Name: CODECALC
Company: COADE, Inc. (acquired by the Intergraph Corporation)

CodeCalc is the leading industry software package for design and analysis of pressure vessel and heat exchanger components. In addition to pressure and wall thickness calculations, CodeCalc evaluates loads from supports and attachments. It includes extensive built-in materials and components databases and the latest ASME rules for the construction of pressure vessels plus the latest codes from ASME, TEMA, PD 5500 (British Code), UBC and the Welding Research Council.

Product Name: PVElite
Company: COADE, Inc. (acquired by the Intergraph Corporation)

PVElite is a comprehensive program for the complete structural design or analysis of tall towers and horizontal vessels according to latest standards from ASME, PD 5500 (British Code), UBC, EN 13445, API-579 and the Welding Research Council.

Product Name: TANK
Company: COADE, Inc. (acquired by the Intergraph Corporation)

TANK is a comprehensive, easy-to-use software program for the design, analysis and evaluation of welded steel oil storage tanks according to the latest American Petroleum Institute (API) Standards 650 and 653. It provides owners, operators and engineering firms with quick and comprehensive designs for new tank construction and evaluation of existing tanks.

Product Name: DDS HVAC
Company: Data Design Systems ASA

HVAC Modelling and Design DDS HVAC Partner is an integrated design system for professional planning, production and control of HVAC & Sanitary system documentation. The high-level systems intelligence and logical user interface has established HVAC Partner as an proficient planning tool, not only for the professional consulting engineer, but also for installation contractors and ventilation specialists. Facility management organisations also enjoy productivity gains using the system.

Product Name: XC2® Hydrant Testing/Flushing
Company: EngSoft Solutions/XC2 Software

Hydrant Flow Testing/Flushing and Maintenance

• Schedule all aspects of maintenance and testing
• Track the complete history of each hydrant
• Record flow rates at various pressures
• Display and print Flow Test graph
• Print Flow Test and Maintenance forms
• Maintain records of repairs done and replacements made
• Spot trends in your distribution system
• Assure community safety with serviceable hydrants
• Report any aspect or status of your program

Product Name: I-Route
Company: Intergraph Corporation

I-Route represents a new approach to pipe routing during the early stages of plant layout studies and preliminary design. It integrates with any suitable host system and supports a neutral definition of the pipe routing problem. I-Route was designed to provide fast, scalable pipe routing solutions to industrial strength problems.

Product Name: TRI*TANK650
Company: PipingSolutions Inc.

TRI*TANK650™ designs or re-rates cylindrical tanks with sloped or flat-bottoms in accordance with API 650 Standard, "Welded Steel Tanks for Oil Storage", 8th. 9th. or 10th. Editions. Wind and seismic loads can be applied in the re-rating or design modes, and the allowable criteria of several different wind and seismic standards can be applied.

Product Name: WERCO*107/297
Company: PipingSolutions Inc.

WERCO*107 calculates local stresses in vessel shells at nozzle and lug connections due to externally applied loads in accordance with the Welding Research Council Bulletin 107.

Product Name: WERCO*297
Company: PipingSolutions Inc.

WERCO*297 calculates local stresses in vessel shells at nozzle and lug connections due to externally applied loads in accordance with the Welding Research Council Bulletin 297.

Product Name: PCC
Company: Red-Bag

Pipe lines in refineries and chemical plants consist of many types of components and sizes. During the design phase of a plant these components are selected mainly based on the design conditions of the process contained in the piping systems. The components are grouped in so-called pipe classes. The class defines the components to be used for certain process conditions.

Product Name: Finite Element Analysis
Company: Speed Engineering Solutions Pvt. LTd.

Our capabilities in finite element analysis span Turbo-machinery, Automotive, Aerospace and Industrial products domains.Thermal & structural analysis of steam turbine, land based gas turbine and aero-engine components

Product Name: CADMATIC to CAEPIPE
Company: SST Systems, Inc.

PD2CAEPIPE™, the Plant Design-to-CAEPIPE Interface, is a stand-alone program for transferring pipe geometry including section properties from ELOMATIC’s CADMATIC to SST’s Pipe Stress Analysis software CAEPIPE

Product Name: CAELUG
Company: SST Systems, Inc.

CAELUG is a comprehensive software package for the local stress and flexibility analysis of lug attachments in cylindrical vessels, and piping systems.

Product Name: CAENOZLS
Company: SST Systems, Inc.

CAENOZLS performs linear stress and flexibility analyses of radial nozzle or pipe penetrations in spherical vessels or cylindrical vessel heads. The analysis is performed for: (1) six external load components (three forces and three moments) acting on each end of the nozzle, (2) nozzle pressure, (3) vessel pressure, and (4) different temperature change for each component at the penetration. The spherical vessel or vessel head may be locally reinforced

Product Name: PD2CAEPIPE™,
Company: SST Systems, Inc.

PD2CAEPIPE™, the Plant Design-to-CAEPIPE Interface, is a stand-alone program for transferring pipe geometry including section properties from Intergraph’s Plant Design System (PDS) to SST’s Pipe Stress Analysis software CAEPIPE.

Product Name: PDMS2KP (TM)
Company: SST Systems, Inc.

PDMS2KP (TM) the PDMS-to-CAEPIPE Interface, is a stand-alone program for transferring pipe geometry including section properties from AVEVA's Plant Design Management System (PDMS) to SST's Pipe Stress Analysis software CAEPIPE.

Product Name: PIPESTRESS
Company: SST Systems, Inc.

PIPESTRESS (formerly called PS+CAEPIPE) is a library of interrelated software modules for static and dynamic analyses of nuclear and non-nuclear piping systems. It provides unmatched dynamic analysis power to handle complicated problems.


Featured Video
Jobs
Geodesign Manager for Design Workshop at Aspen, Colorado
GIS Analyst (Dallas Police) for City of Dallas at Dallas, Texas
Failure Analysis Engineer for Flextronics at Milpitas, California
Mechanical Engineer for Flextronics at Milpitas, California
GIS ANALYST I.8030200 for Dallas County at DALLAS, Texas
Upcoming Events
Digital Construction Week 2020 at Excel London United Kingdom - Oct 21 - 22, 2020
2020 Design-Build Conference & Expo! at Gaylord National Resort & Convention Center National Harbor MD - Oct 28 - 30, 2020
ABX | ArchitectureBoston Expo at Boston Convention & Exhibition Center Boston MA - Nov 4 - 5, 2020
Greenbuild 2020 at San Diego Convention Center San Diego CA - Nov 4 - 7, 2020
Kenesto: 30 day trial
Digital Cities
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise